Accurpress 717512 Hydraulic Press Brake

For more information on this equipment

Contact: Maggie Williams
E-Mail Address: mwilliams@capitalmachine.com

Phone#: (800)635-7777

Location: Nashville, Tennessee

Posted 4/30/09

Model: Accurpress 717512
Year: 1995

Equipped With :

Voltage is 480/3/60

3” x 3” x 72” Die Holder

Torque-Tube Cylinder

•  Guaranteed Parallelism & Synchronization Repeatability

•  Simple to maintain compared to other systems

•  Eliminates RAM drifting during Power-Off time. No Blocking to safeguard tooling & gibbing

Frame Members built from A-36 Steel

•  Produces less Deflection

Maintenance:

Easy-Access Hydraulics Mounted Independent at side of machine

•  Less Time to Inspect & Service

•  Safer to maintain and work on

•  Available Baldor motors/Vicker Valves Components

•  Tonnage Indicator gauge at Front

Hydraulic Oil Cooler

•  Reduced Maintenance

•  Optimum oil temperatures maintained

Self-Lubricating Spherical Bearings

•  Long Life

•  Low Maintenance

•  NO Lubrication service

Set-up:

Pedestal Mounted, Power RAM Tilt Control

•  Reduces Set-up time, Eliminates Shimming,

& Provides End-to-End Accuracy

OSHA Safety Station with 3 Position Footswitch

•  Double RAM Control

Three Mode Operation

•  Jog or Inch

•  Manual Mode

•  Cycle – Auto

Note: Machine currently has AP2 two axis backgauge. Many parts are not available if gauging needs repair. Automec Gauging can be retrofitted to this machine if needed.